A message to our customers and suppliers about COVID-19. Learn more

AksIM-2™ off-axis rotary absolute encoder

Compare

AksIM-2

More Views

  • AksIM-2
  • MR022
  • MR029_1
  • MRO29_2
  • MR039
  • MR049_1
  • MR049_2
  • MR049_3
  • MR053_1
  • MR053_2
  • MR064
  • MR080_1
  • MR080_2
  • MR080_3

AksIM-2 is a non-contact, high performance off-axis absolute rotary encoder designed for integration into applications with limited space. A hollow ring, true absolute functionality and high-speed operation make this encoder suitable for many applications.

 

The AksIM-2 encoder system consists of an axially magnetised ring and a readhead.

 

The encoders are equipped with BiSS, asynchronous-serial (UART), SPI, PWM or SSI communication interfaces and offer a range of binary resolutions up to 20 bits per revolution.

 

The encoder operates in a temperature range from -40 °C to +105 °C and is highly resistant to shock and vibration.

 

The AksIM-2 encoder has a built-in advanced self-monitoring function that continuously checks several internal parameters. Error reports, warnings and other status signals are available on all communication interfaces and are visualised with the on-board LED.

 

The AksIM-2 encoder system is suitable for use in industrial and medical applications.

 

A typical application is a robot arm joint with a cable feed through the ring, or a precision gearbox where the ring is mounted on the main transmission shaft.

 

A custom design service for OEM integration is also available.

All output types
Reading type Axial reading
Resolution From 17 bit to 20 bit and 16 bit multiturn counter option
Maximum speed 10,000 rpm (for higher speed please send contact for quote)
Encoder accuracy ±0.05° / 180 arcsec (before installation - errors caused by mounting inaccuracy of the readhead, ring and drive shaft are not included)
Final system accuracy Typ. ±0.025° / 90 arcsec
Hysteresis Less than unit of resolution
Repeatability Better than unit of resolution
Encoder speed 9 kHz bandwidth, 18 kHz sampling rate, up to 44 kHz refresh rate
All output types 
Supply voltage 4.5 V to 5.5 V (at the connector)
Set-up time 100 ms (first data ready after supply voltage is in range)
Current consumption Typ. 130 mA, max. 150 mA
Connection 8-pin low-profile connector or soldering pads
Output load
RS422 ±40 mA
PWM 5 mA (LVTTL logic level)
ESD protection HBM, Class 2, ±2 kV
All output types 
Available ring sizes
(outer diameter)
22 mm, 29 mm, 39 mm, 49 mm, 53 mm, 64 mm, 80 mm
Material type
2 mm thick rings EN 1.4016 / AISI430 with glued CPE rubber filled
with ferrite particles
3.9 mm and
4.9 mm thick rings
EN 1.4005 / AISI416 or EN 1.4104 / AISI430F
with glued CPE rubber filled with
ferrite particles
All output types
Operating and storage temperature –40 °C to +105 °C (standard)
–30 °C to +85 °C (obsolete, available only on request)
Humidity 0 to 70 % non-condensing
External magnetic field ±25 mT

Features

  • True absolute system
  • Custom magnetic sensor ASIC
  • Self-calibration option
  • No hysteresis
  • Resolutions up to 20 bits
  • Multiturn counter option
  • High speed operation
  • 9 kHz bandwidth, 44 kHz refresh rate
  • Low profile, non-contact
  • Built-in self-monitoring
  • Integrated status LED
  • BiSS, Asynchronous serial (UART), PWM or SSI
  • Corrosion resistant magnetic ring
  • Up to 600 bar pressure

Buy products by choosing the specificationsClick here to choose the specifications

Loading configurator...
Lead time up to: 10 working days