Cables

Cable assembly for connection of MOLEX 501330-1100, 12 core. It exists in 3 options (depending on lengths: 30, 50, 100 cm).

An extension cable for the DHR and DHL Artos™ readhead. The encoder side of the extension cable is equipped with the M12 connector. The termination on the controller side is selectable (flying leads, M12 or D-SUB 9 pin connector).

Molex Premo-Flex™ FFC Jumper, 6 Circuits, 152 mm, 1 mm pitch. This cable can be used with AksIM-1 MBA encoder.

Cable assembly with 11 pin Molex connector (PN: 501330-1100), 8 core 1 m long. Suitable to connect Orbis encoders. For details and pinout see Orbis datasheet.

Cable assembly FCI 8 pin, flying leads, 8 wire, single shield, 1 m. Suitable to connect AksIM-2 encoder. For details and pinout see AksIM-2 datasheet.

Cable assembly FCI 8 pin, D-sub 9 pin, single shield, 1m. Suitable to connect AksIM-2 encoder to E201 interface. For details and pinout see AksIM-2 datasheet.

Cable assembly Molex 12 pin, flying leads, 12 wire, twisted pairs, shielded, 1 m. Suitable to connect AksIM-2 Redundant variant MB039xxxxxxRRT00. For details and pinout see AksIM-2 Redundant datasheet. Cable assembly Molex 12 pin, flying leads, 12 wire, twisted pairs, shielded, 1 m. Suitable to connect AksIM-2 Redundant variant MB039xxxxxxRRT00 and the Artos system. For details and pinout, see the respective datasheets for AksIM-2 Redundant and Artos systems.

Cable assembly Molex 11 pin, flying leads, 8 wire, single shield, 3 m. Suitable to connect AksIM-2 and Orbis encoders. For details and pinout see Orbis datasheet.

Cable assembly Molex 11 pin, D-sub 9 pin, single shield, 1 m. Suitable to connect Orbis encoders to E201 interface. For details and pinout see Orbis datasheet.

Cable assembly Molex 15133-0603 for connection with Molex 501568-0607. This cable can be used with RMB20Sx_96 encoder.

Cable Assembly Molex 11 pin, flying lead, 1 m.

Cable Assembly Molex 11 pin, DB9, 1 m. For connection to E201.

Molex Premo-Flex™ FFC Jumper, 6 Circuits, 203 mm, 0.5 mm pitch. This cable can be used with RMB14SC encoder.

Molex Premo-Flex™ FFC Jumper, 8 Circuits, 203 mm, 0.5 mm pitch. This cable can be used with RMB14IC encoder.

FFC Cable, 20 Core, 0.5 mm pitch, Same Sided Contacts, 152 mm (6 inch) length. This encoder can be used with AksIM-2 redundant encoder.

Cable assembly with dual ended JST connectors - SSI output. For use with LDB02 and RMB14 SSI output , please choose 6 pin.

Cable assembly with dual ended JST connectors - SSI output. For use with LDB02 and RMB14 SSI output , please choose 6 pin.

Cable assembly with dual ended JST connectors - incremental output. For use with LDB01, please chose pin 8.

Cable assembly with dual ended JST connectors - incremental output. For use with LDB01, please chose pin 8.

Cable Assembly Molex 11 pin to Flying Leads, 1 m, OD 6.2 mm, max.temp 80 °C. Suitable to connect Orbis encoders. For details and pinout see Orbis datasheet.

Cable assembly FCI 8 pin, flying leads, 8 wire, single shield, 1 m, OD 6.2 mm, max.temp 80 °C. Suitable to connect AksIM-2 encoder. For details and pinout see AksIM-2 datasheet.

ACC050 - 76.2 mm long

ACC051 - 152.4 mm long

ACC052 - 304.8 mm long

ACC053 - 609.6 mm long

Cable assembly ACC054, Molex connector, flying leads, length 1 m. Suitable to connect RLC2IC encoder with connector option 12 - Molex 5015681107.

Cable assembly ACC055, Molex connector, DB-9 connector, length 1 m. Suitable to connect RLC2IC encoder with connector option 12 - Molex 5015681107.

Cable assembly ACC056, Amphenol connector, flying leads, length 1 m. Suitable to connect RLC2IC encoder with connector option 20 - Connector AMPHENOL 10114828-11108LF.

Cable assembly ACC057, Amphenol connector, DB-9 connector, length 1 m. Suitable to connect RLC2IC encoder with connector option 20 - Connector AMPHENOL 10114828-11108LF.

Cable assembly ACC058, FFC connector, length 152 mm. Suitable to connect RLC2IC encoder with connector option 13 - Connector Molex 527451197.

Cable assembly ACC059, FFC connector, length 305 mm.

Cable assembly FCI 8 pin, flying leads, 8 wire, single shield, 3 m. Suitable to connect AksIM-2 encoder. For details and pinout see AksIM-2 datasheet.

Cable assembly FCI 8 pin, D-sub 9 pin, single shield, 1 m, OD 6.2 mm, max. temp 80 °C. Suitable to connect AksIM-2 encoder to E201 interface. For details and pinout see AksIM-2 datasheet.

Cable Assembly Molex 11 pin to Flying Leads, 3 m, OD 6.2 mm, max. temp 80 °C. Suitable to connect Orbis encoders. For details and pinout see Orbis datasheet.

Cable assembly Molex 11 pin, D-sub 9 pin, single shield, 1 m. OD 6.2 mm, max. temperature 80 °C. Suitable to connect Orbis encoders to E201 interface. For details and pinout see Orbis datasheet.

Cable assembly Molex 11 pin, BB, Flying leads, single shield, 1 m. OD 6.2 mm, max. temperature 80 °C. Suitable to connect Orbis Battery Backup Multiturn encoder. For details and pinout see Orbis Battery Backup Multiturn datasheet.

Cable assembly Molex 11 pin, BB, D-sub 9 pin, single shield, 1 m. OD 6.2 mm, max. temperature 80 °C. Suitable to connect Orbis Battery Backup Multiturn encoder. For details and pinout see Orbis Battery Backup Multiturn datasheet.

Cable assembly FCI 8 pin, flying leads, 8 wire, single shield, 3 m, OD 6.2 mm, max. temperature 80 °C. Suitable to connect AksIM-2 encoder. For details and pinout see AksIM-2 datasheet.

Cable assembly, 4 pin, 0.5 m, dual ended JST connectors. Compatible with RMB14Vx with header connector.

Cable assembly, 4 pin, 1 m, dual ended JST connectors. Compatible with RMB14Vx with header connector.